User Manual

26
Settings
Security
The security settings protects your phone from improper and unauthorized use.
, These confidential numbers should be kept in a safe place for future access, if
required.
Code
You may be required to enter one of the following security codes as shown below. When the
phone prompts you for one of these codes, use the keypad to enter the appropriate number
and press Left Softkey to confirm.
• PIN code (provided by your network to protect your SIM card if it is stolen)
• PIN2 code (provided by your network for charge information and FDN services protection)
• PUK/PUK2 code (respective personal unblocking code in case you forget the PIN/PUK code)
• Phone code (default setting is “0000”)
, If you forget any of these codes, ALWAYS contact your service provider as they are
the ONLY source for your codes.
, If the PIN2 code is entered incorrectly 3 times, you will need to contact your service
provider for a PUK2 code.
, The PIN codes and security codes are between 4 to 8 digits.
, If the phone code is entered incorrectly 10 times (not necessarily in the same
session), the phone code will be locked. In order to unlock the code, you will need
to contact your service provider.
Change PINs
The PIN will be requested most of the times when the phone is switched on. This feature can be
deactivated, at the risk of unauthorized usage of your phone. Some service providers do not permit the
deactivation of this control.
You can set up your phone to require your PIN code entered when the phone is switched on before the
phone can be used and receive any incoming calls. If you entered your PIN code incorrectly for more
than three times (not necessarily in the same session), you will have to contact your service provider for
a PUK code to unblock your SIM card.
2 Your phone supports advanced features (e.g. FDN) that may require a PIN2 code to be entered
before they can be accessed or modified.
PIN/PIN2/Phone code change
2 You can change PIN code when PIN activate setting is turned on.
☛ ➔ Settings ➔ Security ➔ Code .
☛ Select either Change PIN / Change PIN2 / Chg. phone code .
☛ Enter the current code ➔ Enter a new code ➔ Enter a new code again ➔ Left Softkey
to confirm the new code ➔ A confirmation screen is displayed momentarily and the
phone returns to
Code display menu.
, The PIN2 code is SIM card related and may only be available from your service
provider.