User's Manual

78
• Use  navigation key to move down to the Time field (when the function is toggled on) to set the auto on time.
• Press Left Softkey to save the settings and return to the
Clock menu screen. A tick in the check box indicates that the function is activated.
After a preset time elapsed, the function will indicate last 3 seconds of the countdown timer by a beep tone. At the end of the countdown time, a
special beep can be heard.
• From the main menu, select
Accessory > Clock > Countdown .
• Press Left Softkey to set a desired duration for the countdown. Edit the countdown timer and press Right Softkey to save the setting. Press
Right Softkey to start the countdown.
• To pause the countdown, press Right Softkey. Press Right Softkey again to continue with the countdown.
• To reset the countdown timers after pausing, press Left Softkey.
From the main menu, select
Accessory > Clock > Stopwatch . A maximum of two timings can be registered with the stopwatch.
• Press Left Softkey to start the timing. To register the first timing, press Left Softkey. To register the next timing, press Left Softkey again.
• To register only one timing with the stopwatch, press Left Softkey to start timing and Right Softkey to stop.
• To reset all time counters, press Left Softkey.
You can perform addition, subtraction, multiplication and division of numbers with the calculator function. You can enter up to 8 digits. The calculator
can display a result of up to 9 digits, with a maximum of 6 decimal places.
If a calculation results in a number exceeding the maximum, “Over range” appears in the calculation field.
Calculator key
The following keys are assigned with different functions under the calculator:
•  navigation key: Addition (+)
•  navigation key: Subtraction (-)
•  navigation key: Multiplication (x)
•  navigation key: Division (÷)
• Left Softkey: Equals to (=)
• Right Softkey: Clear
• : Back to the standby screen
Countdown
Stopwatch
Calculator