User's Manual

ManualsBrandsQuanta Computer ManualsCell PhonesSmart Phone

F-

11D

1. Definition (

適用

This Document is based on the Fujitsu Low Tier Smart Phone product requirement

Fujitsu and apply to the IS3 (Swordfish) specification. IS3 is defined as a low tier Android smart

phone for Japanese and Europe Markets. The RF interfaces for IS3 will include UMTS, WiFi and

Bluetooth. The design platforms for IS3 are based o

Ice Cream Sandwich (ICS) version.

2. Basic Specification (

2.1

ID, Outlook and Form Factor

Light Sensor

11D

Specification

適用

)

This Document is based on the Fujitsu Low Tier Smart Phone product requirement

Fujitsu and apply to the IS3 (Swordfish) specification. IS3 is defined as a low tier Android smart

phone for Japanese and Europe Markets. The RF interfaces for IS3 will include UMTS, WiFi and

Bluetooth. The design platforms for IS3 are based o

n Qualcomm 8255A-

0 and Google Android OS

Ice Cream Sandwich (ICS) version.

2. Basic Specification (

基本仕様)

ID, Outlook and Form Factor

Specification

This Document is based on the Fujitsu Low Tier Smart Phone product requirement

provided by

Fujitsu and apply to the IS3 (Swordfish) specification. IS3 is defined as a low tier Android smart

phone for Japanese and Europe Markets. The RF interfaces for IS3 will include UMTS, WiFi and

0 and Google Android OS

Summary of content (7 pages)

PAGE 1
F-11D Specification 1. Definition (適用) This Document is based on the Fujitsu Low Tier Smart Phone product requirement1 provided by Fujitsu and apply to the IS3 (Swordfish) specification. IS3 is defined as a low tier Android smart phone for Japanese and Europe Markets. The RF interfaces for IS3 will include UMTS, WiFi and Bluetooth. The design platforms for IS3 are based on Qualcomm 8255A-0 and Google Android OS Ice Cream Sandwich (ICS) version. 2. Basic Specification (基本仕様) 2.
PAGE 2
Form Factor Bar type Target weight 124 g Dimensions 119.4mm(L) x 60mm(W) x 10.85mm(T) Product Cubage 77.7 cc 2.2 System Temperature and Humidity 1) Operating temperature/Humidity -5~45 degree C / 0~80 %RH 2) Storage Temperature / Humidity -25~70 degree C / 0~90 %RH 3) RF portion* operating temperature -10~55 degree C 2.3 Hardware Specification (ハードウェアハードウェア仕仕ハードウェア様) Item CPU Specification Qualcomm MSM8255A-0 SoC, CorTex A8 core The CPU clock speed is running up to 1 GHz.
PAGE 3
FM FM transmitter frequency: 77.4MHz ~ 85MHz Transmitter USB USB 2.0 FS/HS client Micro-B type connector For both Data Sync and power charging (Earphone will be sell with EUT and EU market) Sensors* Accelerator Compass Proximity (On: 2cm / Off: 2.5cm) Ambient light sensor Lux Brightness 0Lx～50Lx 25cd/m^2～105cd/m^2 150Lx～300Lx 700Lx～750Lx 54cd/m^2～200cd/m^2 80～100cd/m^2 more than 100cd/m^2 IrDA (Operation Degree: 20cm/30 deg) Speaker 0.
PAGE 4
RF system PMIC MSM8255A-0+QTR8615 UMTS/HSDPA 800/1700/2100 PM8058 Tele Service Coding Type AMR-NB, FR, EFR, HR, AMR-WB GSM Voice Feature Support MT/MO call Emergency call Ciphering A5/1, A5/3 Circuit-switching data 9.6 kbps, 14.4 kbps, 64kbps(for VT supported) GPRS DTM operation Simple Class A Terminal Class Class 12 (4Rx + 4Tx, max:5) Service Class Class B Coding Scheme CS1, CS2, CS3 and CS4 Ciphering GEA1, GEA2, GEA3 Power Control GSM05.08 Sec.
PAGE 5
3GPP 27.005 Short Message SMS Class 0, 1 and 2 SMS GSM TS7.05 / Short Message MT/MO gpsOne® Gen 6 Engine support, C/No Avg 37 GPS dB/Hz 2.5.
PAGE 6
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 7
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.