User's Manual

6 Main features
If you don’t want your phone to ring when you
receive a call, deactivate the ringer by selecting
Settings >Sounds > Ringer volume and press
R
Select. Press R Edit, then press < until the volume
is off.
If you want your phone to vibrate when you receive a
call, activate the vibra alert by selecting Settings
> Sounds >Vibrator alert, then press
> or R
Change to set in On. Repeat to set it Off (changes are
automatically taken into account).
Activating the vibra doesn’t mute the ringer. If you
want to both mute it and keep the vibra on, activate
the silence mode as described above.
To read your own mobile phone number, press
-
when in idle mode and select SIM entries. Then select
Own number: your number is displayed if present on
your SIM card. If not, select <Empty>, press
R
Edit, then follow the instructions.
During a call, press
+ or - to increase/decrease the
volume.
To mute the microphone so that your caller cannot
hear you, press
R Menu during the call, select
Mute, then press
> or R Change to Mute. Repeat
to Unmute (changes are automatically taken into
account).
To clear your call lists, press
+ in idle mode to access
the Calls missed, Calls received and Calls dialled.
R Select the list you want to clear, press R
Options, then Delete all. Press R Select to delete
all calls at once, confirm with
R Yes. Repeat for
each list.
To clear the content of either phonebook at once,
select a contact and press
R Options. Select Delete
all, press
R Select and confirm with R Yes.
Activate the silence mode
Activate the vibra alert
Read your mobile phone number
Adjust the earpiece volume
Mute/unmute the microphone
Clear the call lists
Clear the phonebook
Philips568_GB_4311 255 60731.book Page 6 Vendredi, 13. août 2004 6:00 18