User's Manual

Main features 5
The right R and left L softkeys located on top
of the keypad allow you to select the corresponding
options displayed on the screen in idle mode. These
keys can be configured as follows:
1. Press either key, then press R Change.
2. Browse the list of available options.
If you want the softkey to dial a number, select
Phone number and press
R Select, then
choose a number in the contacts list. Press
R
Select to link this number to the softkey.
3. Back to idle, press the configured key to launch
the corresponding feature or dial the number.
For speed dialling, you can also link an alphanumeric
key to a number: see page xx for details.
Your mobile phone features a camera, allowing you to
take pictures and send them to your friends and
relatives. See “Pictures & videos” page 13 for
complete information on this subject.
For your own comfort and safety, ensure you move the
phone away from your ear when calling handsfree,
especially when increasing the volume.
Make a call. Once the connection is established, press
, or R Menu, select Loudspeaker, then press >
or R Change to set in On. Repeat to set it Off
(changes are automatically taken into account).
During a call, simply press
L Onhold. To retrieve
the call, press
L Return.
Select Settings > Sound > Ringer, press
R Edit,
then
R Change. Browse the list and press R
Select to confirm your choice.
The above applies to incoming calls. This menu also
allows you to change the Ringer of Alarms, SMS &
Cell broadcast. See page xx for details.
Set a flash softkey
Take a p ic tu re
Call handsfree
Put the call on hold
Change the ringer
Philips568_GB_4311 255 60731.book Page 5 Vendredi, 13. août 2004 6:00 18