User Manual
A new standard modem is now set up on
your PC, but you still need to create a new
dial-up connection:
1. Click Start > Settings > Control Panel
> Network and Dial-up Connections >
Make New Connection.
2. To continue, tap Next.
4
3. Select Dial-up to the Internet. Tap Next.
4. Enable the option I want to set up my
Internet connection manually, or I
want to connect through a local area
network (LAN) button, and Next.
5. Select I connect through a phone
line and a modem option, and then
Next.
6. Enable the Use area code and dialing
rules checkbox and enter the telephone
number *99#, and then Next.
7. Enter the username and password you
use to log on to your ISP and click Next.
8. Enter a name for this connection
and then Next.
9. Select No when the installation
wizard asks you to set up an Internet
mail account and then click Next.
10.After the installation is completed, click
Finish.
Connecting via USB Port
As with connection via USB Port, you need to
check the following before you start using the
Wireless Modem on your Apollo
via USB connection:
• Make sure that a GPRS enabled SIM
card is inserted in your Apollo.
• Disable the ActiveSync com
port connection of your PC.
• Disable the Infrared function by
tapping the Start menu > Settings >
the Connections tab > Beam and then
uncheck Receive all incoming beams.
• Connect your Apollo to your PC USB
connection (using the USB sync cable).
Before setting up a USB modem, you must
verify that you have two les, USBMDM and
USBModem_Dialer, on the Companion CD.
Insert the Companion CD into your PC and
perform the settings as follows:
1. Tap the Start menu > Programs >
Wireless Modem.
2. Select the USB connection type from
the drop-down list and insert the USB
cable adapter.
3. Tap the Start button on the Wireless
Modem screen of your Apollo.
4. A Found New Hardware message
will pop up on your desktop PC.
5. Select the Display a list of the known
drivers for this device so that I can
choose a specic driver option and
then click Next.
6. Select Modem from the Hardware types
list and then Next.
7. Click the Have Disk button and then
Next.
58