User Manual

Checking the battery
The battery indicator displays the charge
level of the battery. Check the icon at the top
right corner of the Today screen.
• Full battery power
• Low battery power
• Battery empty
• Battery charging
Low battery indication
When the battery voltage falls below the
working level, a warning message appears
on the screen and a warning tone sounds to
alert you, if you activate the warning sounds
for system events (Please see Chapter 11.
Settings). Save the data you are working on
at the moment, perform synchronization with
your PC, and turn off your Apollo.
(For more details about data safety, please
see 2.9 Data Backup).
2.4 Switching the
device on or off
• Press the Power button on the top of
the phone to switch on your device.
When you switch on the device for the
rst time, your device will power up
and automatically begin the initiation/
calibration process. See 2.5 Screen
tapping & calibration for further details.
• To switch off your device, press the
Power button again.
Please note
Switching off your device will suspend
the screen display and the device
will enter sleep mode to save battery
power. When your device is in sleep
mode, press the Power button to wake
up the device; the device will then
display the Today screen.
2
2.5 Screen tapping &
calibration
When you rst start up your Apollo, you will
be asked to calibrate the screen by tapping
the center of a cross with your stylus as it
moves around the screen. This process
ensures that, when you tap the screen with
your stylus, the tapped item is activated.
Re-calibrate the screen
If your Apollo does not respond accurately
to screen taps, you will need to recalibrate
it:
1. Tap Start > Settings > System tab >
Screen.
2. Tap the Align Screen button on the
General tab to recalibrate the screen as
described above.
Please note
When aligning the touchscreen, tap the
target rmly and accurately.
29