User Manual

9
152
Navigate between slides
If a presentation is set up as a timed
slideshow, slides will advance automatically.
However, if the presentation is not timed,
or you simply want to go to another slide
out of sequence, you can do that easily in a
PowerPoint Mobile presentation.
1. Tap Start > Programs > PowerPoint
Mobile.
2. Open the presentation you want to view,
tap ▲ arrow > Go to Slide.
3. Tap the slide you want to view. Simply
tap the current slide to go to the next one.
Please note
If you have zoomed in to see a slide
in more detail, you cannot navigate to
another slide until you zoom out.
Tapping Next or Previous may play an
animation on a slide rather than navigate to
another slide.
Set slideshow playback options
You can override some of the playback
options stored in a PowerPoint presentation.
1. Tap Start > Programs > PowerPoint
Mobile.
2. Open the presentation you want to view,
tap ▲ arrow > Show Options.
3. Tap the Playback tab, select the
Override playback options for all les
check box, and do any of the following:
• To turn off builds and other
animations, select the Show without
animation check box.
• To prevent slide transitions, select
the Show without slide transition
check box.
• To use the timings recorded with
each slide in a presentation, select
the Use slide timings, if present
check box.
• To automatically advance to the rst
slide after the last in a presentation,
select the Loop continuously check box.
4. Tap OK.
Please note
To turn the presentation into a
continuously looping slideshow, select
both the Use timings, if present and
the Loop continuously check boxes.
Stop a slide show presentation
In the PowerPoint presentation, tap ▲
arrow > End Show.
Zoom in and out in a slide
Zoom in to see a portion of a slide in more
detail and zoom out to see the entire slide.
1. In a PowerPoint Mobile presentation, tap
▲ arrow > Zoom In.
2. Do one of the following:
• To zoom in another level, tap .
• To zoom out, tap .
• To return to the slideshow, tap .