User Manual
Item Description
Add
Add one more stamp from the list and enter the ClipArt Library.
OK
To confirm that all stamps are attached and return to the upper level (Edit
Mode).
Save
When you conduct any editing command, the icon will be enabled. After saving, you will
7
remain in the edit mode. The icon will be dimmed if you don’t do any editing work.
Please note
If the resolution of the saved picture is larger than 320X240, the edited image will be
saved in 320X240 only. The edited image will be saved as a new le. The le name will
be edit_xxxxx.jpg where ‘xxxxx’ is the original le name.
Reset
Before you save the edited picture, you can use Reset to clear all edited results.
OK/Exit the Edit mode
To conrm that all stamps are attached and return to the edit screen:
• When no edit function is conducted or saved, it will return to the view screen without
any pop-up notication.
• Back to any edit function that was conducted
• When you have edited the image and tapped Album or pressed any key to exit, there will
be a pop-up notication asking you, “File has been changed. Save it?” Tap Yes to enter
the Save dialog, No to exit without saving and Cancel to remain in the Edit mode.
The Save dialog includes the following details:
• Name: You can change le name.
• Folder: Just select default folder in Device or Storage card.
• Type: JPEG or BMP type.
124