User Manual Part 5

195
Installing a PCI card in the docking station
www.gateway.com
Installing a PCI card in the docking
station
You can install one standard half-length PCI card in your docking station.
To install a PCI card:
1 Remove your notebook from the docking station.
2 Unplug all cables, including the power cord.
3 Remove the screw on the back of the docking station.
Important The PCI card bay cover is locked when the release latch
is down and the docking station is secured using the
Kensington lock slot.
Solo9550.book Page 195 Tuesday, June 19, 2001 3:18 PM