User Manual Part 5

194
Chapter 13: Using the Port Replicator and Docking Station
www.gateway.com
To undock your notebook:
1 Click Start, then select Eject PC or press the Docking Eject button on the
front of the docking station. The Eject PC menu item appears in the Start
menu only while the notebook is docked.
2 Lift the release latch on the docking station until the notebook is
disconnected.
3 Lift the notebook off of the docking posts.
Adjusting audio settings
Your notebook is configured to use only its internal audio jacks and speakers,
even while docked. To turn on the docking station’s external speakers and
audio jacks, if you have Windows Me, you must change audio settings (the
settings are changed automatically in Windows NT and Windows 2000). You
can also configure the notebook’s internal speakers (analog audio) to pass
through the digital audio jack to the docking station.
To turn on the docking station’s external speakers and audio jacks in
Windows Me:
1 Double-click the speaker icon on the taskbar. The Volume Control dialog
box opens.
2 Click Advanced. The Advanced Controls for Volume Control dialog box
opens.
3 Click Docked Speakers for analog audio. The docking station audio jacks
are turned on.
- OR -
Click
Enable S/PDIF for digital audio. The docking station digital audio
jack is turned on.
Solo9550.book Page 194 Tuesday, June 19, 2001 3:18 PM