Product Info

144
Chapter 11: Upgrading Your Notebook
www.gateway.com
8 Hold the new or replacement module at a 30-degree angle and press it
into the empty memory slot. This module is keyed so that it can only
be inserted in one direction. If the module does not fit, make sure the
slot in the module lines up with the tab in the memory bay.
9 Gently push the module down flat until it clicks in place.
10 Replace the memory bay cover, insert the battery, connect the AC adapter,
and turn on your notebook.
Important Use only PC100 (100 MHz) or PC133 (133 MHz) memory
modules.
Solo1200.book Page 144 Friday, May 25, 2001 10:48 AM