User guide
Table Of Contents
- QuantStudio 3D Digital PCR System User Guide (Pub. no. MAN0007720 Rev. C.0)
- Copyright Page
- Contents
- About this guide
- Chapter 1. Getting Started
- About the QuantStudio® 3D Digital PCR System
- Operating the instrument
- Prepare the QuantStudio® 3D Digital PCR System for use
- Connect the QuantStudio® 3D Instrument to a network
- Connect the QuantStudio® 3D AnalysisSuite™ Software
- Chapter 2. Prepare Samples and Load Reactions
- Chapter 3. Perform the PCR
- Chapter 4. Analyze the Prepared Chips
- Chapter 5. Troubleshooting
- Appendix A. Maintenance
- Appendix B. Networking
- Appendix C. Parts and Materials
- Appendix D. Specifications and Layout
- Appendix E. Safety
- Documentation and support
- Back Cover
4.
(Optional) Export the system log to a USB drive:
a.
Plug the drive into the USB port on the front of the QuantStudio
®
3D
Instrument.
b.
In the Instrument Log screen, touch Export, then wait for the instrument to
export the log to a text file on the drive.
5.
When you are finished, touch
, then touch to return to the Main Menu.
Appendix A Maintenance
View the instrument log
A
94
QuantStudio
®
3D Digital PCR System User Guide