User guide
Table Of Contents
- QuantStudio 3D Digital PCR System User Guide (Pub. no. MAN0007720 Rev. C.0)
- Copyright Page
- Contents
- About this guide
- Chapter 1. Getting Started
- About the QuantStudio® 3D Digital PCR System
- Operating the instrument
- Prepare the QuantStudio® 3D Digital PCR System for use
- Connect the QuantStudio® 3D Instrument to a network
- Connect the QuantStudio® 3D AnalysisSuite™ Software
- Chapter 2. Prepare Samples and Load Reactions
- Chapter 3. Perform the PCR
- Chapter 4. Analyze the Prepared Chips
- Chapter 5. Troubleshooting
- Appendix A. Maintenance
- Appendix B. Networking
- Appendix C. Parts and Materials
- Appendix D. Specifications and Layout
- Appendix E. Safety
- Documentation and support
- Back Cover
Connect the QuantStudio
®
3D AnalysisSuite
™
Software
You can connect to the QuantStudio
®
3D AnalysisSuite
™
Software before or after you
install the QuantStudio
®
3D Digital PCR Instrument. The software supports two
methods of deployment (cloud and server), so the method that you follow will
depend upon the deployment you purchased. Regardless of the deployment, you can
use the AnalysisSuite
™
Software web application to analyze data generated by your
QuantStudio
®
3D Instrument. For more information, see the user documentation for
the QuantStudio
®
3D AnalysisSuite
™
Software.
Chapter 1 Getting Started
Connect the QuantStudio
®
3D AnalysisSuite
™
Software
1
QuantStudio
®
3D Digital PCR System User Guide
35