User guide

CAUTION! Cleaning and Decontamination. Use only the cleaning and
decontamination methods specified in the manufacturer's user documentation.
It is the responsibility of the operator (or other responsible person) to ensure
the following requirements are met:
·
No decontamination or cleaning agents are used that could cause a
HAZARD as a result of a reaction with parts of the equipment or with
material contained in the equipment.
·
The instrument is properly decontaminated a) if hazardous material is
spilled onto or into the equipment, and/or b) prior to having the instrument
serviced at your facility or sending the instrument for repair, maintenance,
trade-in, disposal, or termination of a loan (decontamination forms may be
requested from customer service).
·
Before using any cleaning or decontamination methods (except those
recommended by the manufacturer), users should confirm with the
manufacturer that the proposed method will not damage the equipment.
Safety and electromagnetic compatibility (EMC) standards
The instrument design and manufacture complies with the standards and
requirements for safety and electromagnetic compatibility as noted in the following
table:
Reference
Description
EU Directive
2006/95/EC
European Union “Low Voltage Directive”
CSA C22.2 No.
61010-1
IEC 61010-1
UL 61010-1
IEC/CSA/UL 61010-1
Safety requirements for electrical equipment for measurement,
control, and laboratory use – Part 1: General requirements
IEC 61010-2-010
[1]
Safety requirements for electrical equipment for measurement,
control, and laboratory use – Part 2-010: Particular requirements
for laboratory equipment for the heating of materials
[1]
A
pplies only to the QuantStudio
®
3D Digital PCR Chip Loader.
Reference
Description
Directive 2004/108/EC European Union “EMC Directive”
EN 61326-1
Electrical Equipment for Measurement,
Control and Laboratory Use – EMC
Requirements – Part 1: General
Requirements
FCC Part 18 (47 CFR) U.S. Standard “Industrial, Scientific, and
Medical Equipment”
Cleaning and
decontamination
Safety
EMC
Appendix E Safety
Safety and electromagnetic compatibility (EMC) standards
E
118 QuantStudio
®
3D Digital PCR System User Guide