User guide

Safety information for instruments not manufactured by Thermo
Fisher Scientific
Some of the accessories provided as part of the instrument system are not designed or
built by Thermo Fisher Scientific. Consult the manufacturer's documentation for the
information needed for the safe use of these products.
Instrument safety
CAUTION! Do not remove instrument protective covers. If you remove the
protective instrument panels or disable interlock devices, you may be exposed
to serious hazards including, but not limited to, severe electrical shock, laser
exposure, crushing, or chemical exposure.
WARNING! Fuse Installation. Before installing the instrument, verify that the
fuses are properly installed and the fuse voltage matches the supply voltage.
Replace fuses only with the type and rating specified for the unit. Improper
fuses can damage the instrument wiring system and cause a fire.
WARNING! Ensure appropriate electrical supply. For safe operation of the
instrument:
·
Plug the system into a properly grounded receptacle with adequate current
capacity.
·
Ensure the electrical supply is of suitable voltage.
·
Never operate the instrument with the ground disconnected. Grounding
continuity is required for safe operation of the instrument.
WARNING! Power Supply Line Cords. Use properly configured and approved
line cords for the power supply in your facility.
WARNING! Disconnecting Power. To fully disconnect power either detach or
unplug the power cord, positioning the instrument such that the power cord is
accessible.
General
Electrical
Appendix E Safety
Safety information for instruments not manufactured by Thermo Fisher
Scientific
E
QuantStudio
®
3D Digital PCR System User Guide 117