User guide
Table Of Contents
- QuantStudio 3D Digital PCR System User Guide (Pub. no. MAN0007720 Rev. C.0)
- Copyright Page
- Contents
- About this guide
- Chapter 1. Getting Started
- About the QuantStudio® 3D Digital PCR System
- Operating the instrument
- Prepare the QuantStudio® 3D Digital PCR System for use
- Connect the QuantStudio® 3D Instrument to a network
- Connect the QuantStudio® 3D AnalysisSuite™ Software
- Chapter 2. Prepare Samples and Load Reactions
- Chapter 3. Perform the PCR
- Chapter 4. Analyze the Prepared Chips
- Chapter 5. Troubleshooting
- Appendix A. Maintenance
- Appendix B. Networking
- Appendix C. Parts and Materials
- Appendix D. Specifications and Layout
- Appendix E. Safety
- Documentation and support
- Back Cover
Safety alerts on this instrument
Additional text may be used with one of the symbols described above when more
specific information is needed to avoid exposure to a hazard. See the following table
for safety alerts found on the instrument.
English French translation
Location on
Instrument
CAUTION! Hazardous
chemicals. Read the Safety
Data Sheets (SDSs) before
handling.
ATTENTION! Produits chimiques
dangereux. Lire les fiches
signalétiques (FS) avant de
manipuler les produits.
Rear instrument
panel
CAUTION! Hazardous
waste. Refer to SDS(s) and
local regulations for
handling and disposal.
ATTENTION! Déchets dangereux.
Lire les fiches signalétiques (FS)
et la réglementation locale
associées à la manipulation et à
l’élimination des déchets.
UV
Location of safety
alerts on the
instrument
Appendix E Safety
Safety alerts on this instrument
E
116
QuantStudio
®
3D Digital PCR System User Guide