User guide

• LAN data destination fields:
– Target Name – Enter a name to identify the LAN data destination.
Note: The target name appears within the Destination Selection and
Export screens.
– Server – Enter the path of the file server using the following syntax,
where smb: and path are optional:
– smb://servername
/share/path
– \\servername\share\path
– User Name – Enter the user name that the instrument should use when
authenticating to the file server.
– Password – Enter the password that the instrument should use when
authenticating to the file server.
6.
Repeat step 3 to step 5 to add additional data destinations as needed.
Upon saving the data destination, the QuantStudio
®
3D Instrument
automatically attempts to connect to the specified location. The instrument saves
the destination only if the connection is successful.
7.
When you are finished adding data destinations, touch
to return to the Main
Menu.
Appendix B Networking
Connect the instrument to the network
B
QuantStudio
®
3D Digital PCR System User Guide 105