User guide
Table Of Contents
- QuantStudio 3D Digital PCR System User Guide (Pub. no. MAN0007720 Rev. C.0)
- Copyright Page
- Contents
- About this guide
- Chapter 1. Getting Started
- About the QuantStudio® 3D Digital PCR System
- Operating the instrument
- Prepare the QuantStudio® 3D Digital PCR System for use
- Connect the QuantStudio® 3D Instrument to a network
- Connect the QuantStudio® 3D AnalysisSuite™ Software
- Chapter 2. Prepare Samples and Load Reactions
- Chapter 3. Perform the PCR
- Chapter 4. Analyze the Prepared Chips
- Chapter 5. Troubleshooting
- Appendix A. Maintenance
- Appendix B. Networking
- Appendix C. Parts and Materials
- Appendix D. Specifications and Layout
- Appendix E. Safety
- Documentation and support
- Back Cover
3.
In the Edit Destinations screen, touch Add to add a data destination.
Note: To edit an existing destination, touch the name of the destination.
4.
In the Choose Destination Type screen, touch the desired network destination:
• Cloud – Touch to specify a QuantStudio
®
3D AnalysisSuite
™
Cloud
Software
data destination.
•
LAN – Touch to specify a network file server data destination.
5.
Touch each field, enter the appropriate data for the destination, then touch Save.
•
Cloud data destination fields:
– Target Name – Enter a name to identify the cloud data destination.
Note: The target name appears within the Destination Selection and
Export screens.
– User Name – Enter the user name that the instrument should use when
authenticating to the AnalysisSuite
™
Cloud Software.
– Password – Enter the password that the instrument should use when
authenticating to the AnalysisSuite
™
Cloud Software.
Appendix B Networking
Connect the instrument to the network
B
104
QuantStudio
®
3D Digital PCR System User Guide