User`s guide

Chapter 2

QDSP

2030 User’s Manua

 Processor Installation

Processor Handling

Carefully follow the steps below in order to prepare the CPU for installation:

1. Remove processor from packaging.

2. Handle the CPU by grasping the substrate edges only with thumb and

forefinger.

CAUTION

DO NOT TOUCH PROCESSOR CONTACTS TO PREVENT DAMAGING

THE CPU.

Installing the CPU

Carefully follow the steps below in order to install the CPU:

1. Check and confirm that you are installing the correct CPU type.

2. Using a screwdriver, disengage (open) the socket actuator, as shown in figure

below.

Figure 4 Disengage the socket actuator

3. Align the gold triangle on the CPU with the similar marking on the socket (see

Figure below). If the processor does not drop completely into the socket, turn the

socket actuator to the open position until the processor drops completely in.

NOTE

You should not have to press down on the processor. If the processor does not drop

completely into the socket, turn the actuator until the processor drops completely in.