User`s guide

Chapter 2
18
QDSP-1100
User’s Manua
l
 Installing a Memory Module
Loosen the 4 flathead screws and remove the chassis bottom cover
Figure 3 chassis bottom cover
Installing a SO-DIMM
1. To avoid generating static electricity and damaging the SO-DIMM, ground
yourself by touching a grounded metal surface or use a ground strap before you
touch the SO-DIMM.
2. Do not touch the connectors of the SO-DIMM. Dirt or other residue may cause a
malfunction.
3. Hold the SO-DIMM with its notch aligned with the memory socket of the
QDSP-1100 and insert it at a 30-degree angle into the socket.
Figure 4 Align the SO-DIMM Memory Module with the onboard socket