User`s guide

Memory Module Installation 2-7KUBE-8110 User’s Guide
4) Fully insert the module into the socket until a “click” is heard. .
Figure 2-5. Fully insert the SO-DIMM Memory Module into the onboard socket
5) Press down on the SO-DIMM so that the tabs of the
socket lock on both sides of the module..
Figure 2-6. Press down on the SO-DIMM Memory Module to lock it in place
X Removing a SO-DIMM:
To remove the SO-DIMM, use your fingers or a small screwdriver to carefully push away the tabs that secure
either side of the SO-DIMM. Lift it out of the socket.
Make sure you store the SO-DIMM in an anti-static bag. T
he socket must be populated with memory
modules of the same size and manufacturer.