User`s guide

2-6 KUBE-8110 User’s Guide
X Memory Module Installation
DDR2 SO-DIMMs have 200-pins and one notch that will match with the onboard SO-DIMM socket. Make
sure that your module is the correct specification for your board.
The KUBE-8110 has a dual SO-DIMM socket. You may populate the upper, lower, or both sockets.
X Installing a SO-DIMM
X Carefully follow the steps below in order to install the SO-DIMMs:
1) To avoid generating static electricity and damaging
the SO-DIMM, ground yourself by touching a
grounded metal surface or use a ground strap before you touch the SO-DIMM.
2) Do not touch the connectors of the SO-DIMM. Di
rt or other residue may cause a malfunction.
3) Hold the SO-DIMM with its notch aligned with the memory socket o
f the KUBE-8110 and insert it at
a 30-degree angle into the socket. .
Figure 2-4. Align the SO-DIMM Memory Module with the onboard socket