User`s guide

Chapter 2
21
KUB
E
-8050/8051 User’s Manua
l
Figure 5 Memory Installation
 Removing a DIMM:
To remove the DIMM, use your fingers or a small screwdriver to carefully push away
the plastic tabs that secure the DIMM at each end. Lift it out of the socket.
NOTE
Make sure you store the DIMM in an anti-static bag. The socket must be populated
with memory modules of the same size and manufacturer.
 HDD Installation
Figure 6 HDD Installation
Secure the hard drive to the brackets using the 4 short screws provided. Connecting
the SATA data & power cables to the HDD and motherboard then secure the
bracket to the chassis.