User`s guide

Internal Connectors and Jumpers 5-7KUBE-8020 User’s Guide
X Jumper Settings
To ensure correct system configuration, the following section describes how to set the jumpers to enable/
disable or change functions. For jumper descriptions, please refer to the table below.
Jumper Function
JP1 LVDS1 Panel Power Selection
JP2 LVDS2 Panel Power Selection
JP3 Clear CMOS Jumper
Table 5-6. Jumper Descriptions
X LVDS1 Panel Power Selection (JP1: 3-pin 2.54mm pitch header):
Function
J
P1
+ 3.3 V (Default) 1-2 Short
+ 5 V 2-3 Short
Table 5-7. Panel Power Selection - LVDS1
X LVDS2 Panel Power Selection (JP2: 3-pin 2.54mm pitch header):
Function
JP
3
+ 3.3 V (Default) 1-2 Short
+ 5 V 2-3 Short
Table 5-8. Panel Power Selection - LVDS2
X Clear CMOS setting (JP3: 2-pin 2.54mm pitch header):
Function
J
P2
Normal (Default) Open
Clear CMOS Short
1
2
Table 5-9. Clear CMOS Setting