User`s guide

Chapter 2

KEMF-4010 User’s

Table 24 DIO1, Digital Input / Output Pin Header

Pin Signal Pin Signal

1 Digital Output 0 2 Digital Input 0

3 Digital Output 1 4 Digital Input 1

5 Digital Output 2 6 Digital Input 2

7 Digital Output 3 8 Digital Input 3

9 +5V / +12V * 10 GND

Pitch:2.54mm [YIMTEX 3322*05SAGR(6T] *：The voltage is selected by JP4

Table 25 HDMI_SPDIF1, SPD/IF Input / Output Pin Header

Pin Signal Name

1 +5V

2 GND

3 SPD/IF Output

4 GND

Pitch: 2.54mm [YIMTEX 3321*04SAGR(6T)]

Table 26 CN1, Panel Backlight Wafer

Pin Signal Name

1 BL_EN*

2 GND

3 +5V / +12V **

4 +5V / +12V **

5 GND

6 BL_ADJ

7 NC

Pitch: 1.25mm WAFER [YIMTEX 501MW1*7STR]

*：The voltage is selected by JP15, **：The voltage is selected by JP12

Note：BL_ADJ can be setting from 0V to 5V in BIOS setup.

Table 27 AMP_L1, AMP_R1, 2 W Audio AMP Output Wafer

Pin Signal Name

1 Speaker+

2 Speaker-

Pitch=2.0mm WAFER [YIMTEX 503PW1*02STR]

Table 28 CD1, CD-ROM Audio Input Wafer

Pin Signal Name

1 CD-IN-R

2 GND

3 GND

4 CD-IN-L

P-2.54mm WAFER [YIMTEX 522CW4SGR]