User`s guide

Overview 5-3KEEX-2010 Series User Guide
X Overview
This chapter provides information on installing the necessary drivers for the KEEX-2010. The following
sections describe driver installation procedures for Windows operating systems. Download the drivers from
the Quanmax website and install them in the order they are listed below. For other operating systems, please
contact Quanmax.
Note: Driver downloads and additional information are available under
Downloads on our web site: www.quanmax.com.
X Chipset Driver Installation
Install the graphics driver by running the file “setup.exe” in VIA_HyperionPro_KEEX-2010.zip. After
installation is complete, reboot the system.
X Graphics Driver Installation
Install the graphics driver by running the file “setup.exe” in Graphics_KEEX-2010.zip. After installation is
complete, reboot the system.
X LAN Driver Installation
Download and extract the contents of LAN_KEEX-2010.zip. Install the Marvell LAN Driver (version
7.24.1.3) by using the Windows"Device Manager". Select the Ethernet controller marked with an exclamation
mark (“!”) under "Other Devices" and install the appropriate driver for your operating system.
X Audio Driver Installation (optional)
If you are using the optional KEDB-1000 Audio Daughter Board, download and extract the contents of
Audio_KEDB-1000.zip. Install the driver by running "WDM_R189.exe”. After installation is complete, reboot
the system.