User`s guide

3-4 KEEX-2010 Series User Guide
4) Fully insert the module into the socket until a “click” is heard.
.
Figure 3-2. Fully insert the SO-DIMM Memory Module into the onboard socket
5) Press down on the SO-DIMM so that the tabs of the socket lock on both sides of the module.
.
Figure 3-3. Press down on the SO-DIMM Memory Module to lock it in place
X Removing a SO-DIMM:
To remove the SO-DIMM, use your fingers or a small screwdriver to carefully push away the tabs that
secure either side of the SO-DIMM. Lift it out of the socket.
Make sure you store the SO-DIMM in an anti-static bag. The socket must be populated with memory
modules of the same size and manufacturer.