User`s guide

Jumper Settings and Pin Definitions 2-5KEEX-2010 Series User Guide

X Jumper Settings

To ensure correct system configuration, the following section describes how to set the jumpers to enable/

disable or change functions. For jumper descriptions, please refer to the table below.

umper Function

JP1 Clear CMOS

JP2 AT/ATX Power mode Selection

JP3 LCD Voltage Selection

Table 2-1. Jumper Descriptions

X Clear CMOS Jumper (JP1: 3-pin 2.0mm pitch header):

Function

Normal (Default) 1-2 Short

Clear CMOS 2-3 Short

Table 2-2. Clear CMOS Jumper

X AT/ATX Mode Selector (JP2: 2-pin 2.0mm pitch header):

Function JP2

ATX Mode (Default) 1-2 Open

AT Mode 1-2 Short

Table 2-3. AT/ATX Mode Selector

X LCD Voltage Selector (JP3: 3-pin 2.0mm pitch header):

Function JP1

+5V 1-2 Short

+3.3V (Default) 2-3 Short

Table 2-4. LCD Voltage Selector