User`s guide

Chapter 2
25
HPC-1010 User’s Manual
 Operating System and Drivers
If your product does not come with an operating system pre-installed, you will need
to install an operating system and the necessary drivers to operate it. After you have
finished assembling your system and connected the appropriate power source,
power it up using the power supply and install the desired operating system.
You can download the drivers for the product from the Quanmax website
at www.quanmax.com and install as instructed there. For other operating systems,
please contact Quanmax.
NOTE
1. To install the VGA driver, please double-click “Setup.exe” which is under below
folder. \Intel VGA\Utilities
2. If your system goes into suspend mode, please push the power button for 2
seconds to wake up the system.
 Maintenance and Prevention
Your HPC-1010 system requires minimal maintenance and care to keep it operating
correctly.
 Occasionally wipe the system with a soft dry cloth.
 You should only remove persistent dirt by use of a soft, slightly damp cloth (use
only a mild detergent).
 Make sure the ventilation holes are clear of debris.
CAUTION
Do NOT do any of the following:
 Allow water to enter the computer
 Use a heavily dampened cloth
 Spray water directly inside of computer