User`s guide

Chapter 1

-1000

User’s Manua

WARNING

Be sure not to block any air vents on the computer. Blocked air vents can cause thermal problems.

 External Connectors

Table 2 USB (USB2.0 Port 0, 1 Type A Connector)

Pin Signal Name Pin Signal Name

1 +5V 5 +5V

2 USB1- 6 USB0-

3 USB1+ 7 USB0+

4 GND 8 GND

Table 3 LAN (10/100/1000 Ethernet RJ-45 Connector)

Pin Signal Pin Signal

1 Tx+ 5 NC

2 Tx- 6 Rx-

3 Rx+ 7 NC

4 NC 8 NC

Table 4 Digital I/Os (DB9 Female Connector)

Pin Signal Pin Signal

1 Digital Output 0 6 Digital Input 2

2 Digital Input 0 7 Digital Output 3

3 Digital Output 1 8 Digital Input 3

4 Digital Input 1 9 +5V

5 Digital Output 2 Screw GND

Table 5 COM1 (RS-232/422/485 DB-9 Connector)

Pin RS232 RS422

RS485

Half Duplex

1 DCD, Data carrier detect TX- DATA-

2 RXD, Receive data RX+ N/A

3 TXD, Transmit data TX+ DATA+

4 DTR, Data terminal ready RX- N/A

5 GND, ground GND GND

6 DSR, Data set ready N/A N/A

7 RTS, Request to send N/A N/A

8 CTS, Clear to send N/A N/A

RI, Ring indicator (+5V / +12V )

Note

：

Selected by BIOS Setting

N/A N/A

*COM1 Function Type RS232/422/485 can be selected from BIOS setting.