ASSEMBLY INSTRUCTION SKU CODE: (WF196798-WF196799) This set is included 2 boxes if don't receive full 2 This bed is designed for use Twin mattress 74 to 75" Long and 38 1/2" Wide and total thickness is not exceeding 6" for Upper Bunk. Twin mattress 74 to 75" Long and 38 1/2" Wide and total thickness is not exceeding 4" for lower bunk The dimensions for length and width must be stated numerically and may additionally be stated in conventional terms, for example, twin size, twin extra long, and the like.
Hardware List Screws 1/4" x80 210 x 40 mm @1/4" x 80 mm PCs Wood dowel PCs Hex-Head bolts 22pcs 21/4" Drawer Stopper Horizontal-Hole bolts 22pcs Wood Screws PCs PCs 7 8 9 21/4" x 26 mm 21/4" x 15 mm 212 x 110 mm Hex-Head bolts PCs Canopy head though -PCs Wood dowel PCs Screws 1/4" x50 Wood Screws PCs Allen Key 1pc apes 21/4" Hex-Head bolts PCs Wheels PCs 05/15
STE P 1 . Following below illustration Assembly Bottom bed's Headboard and Foot board. Using hardware #1 connect A1 1 land AZ legs with C2 Frame, C3 Panel, C4 Wood Bar to complete LEFT side of Bottom Bad.
STE P 2: Following below illustration Using hardware #3, #4 and dowel follow detail view to Assembly Bottom bed's Headboard and Foot board with side rail at detail view for more detail FF “8 NN PCs PCs PCs Inside Side Rail View 07/15
STE P 4: Following below illustration Assembly Upper bed’s Headboard and Foot board. Using hardware #1 connect A3 and 1 |A4 legs with C1 Frame to complete LEFT side of Upper Bed.
finished) on Bottom Bad prep Bed prep Bed (Just ect head of Bottom Bed leg with end of Uj the Dowel #9 to Conn legs. Then use Screw #10 to temperament fix Upper and Bottom Bad STE P 8: Following below illustration. Lay the Uj {finished from step 3).
STE P 1 2 CONGRATULATION, YOU HAVE COMPLETED THE BED just one more to push the Under Bed Trundle into it position 15/15
