Operation Instructions Please do not assemble until receiving the complete 2 packages. If you have not received the complete 2 packages, please be sure to contact us.
NOTE ~2~
ELECTRIC LIFTING & RECLININGG&Massage Heating Operation Instructions When you press any one button the controller will make a sound Heating button:Set the heat motion The power button:Turn on or off the sofa motion Switch button: Choose different body parts to massage Mode button: Set different style of massage motion Timing button: Set the working time of massage Adjust strength button:Set the massage strength Lift button:Press will lift the chair Decline button:Press will decline the chair 4~ ~3
PRODUCT FEATURES Power Reclining Power Lifting Massage Heating IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including: Always unplug the lift chair from the power source after use, and before cleaning. Do not touch lift chair if large amounts of liquid have spilled on it. Unplug immediately. The chair should never be left unattended when plugged in.
HEALTH CAUTION If you have any concerns regarding to your health, consult your doctor before using this product. Individuals with pacemakers should not use this product. If you have pain in a muscle or joint after using for a prolonged period of time, discontinue using and consult your doctor. Persist pain could be a symptom of a more serious condition. MAINTAINANCE INSTRUCTIONS TO STORE: Place unit in its box or safety dry and cool place.
OPERATING INSTRUCTION Press the button to make the sofa lifted. Press the button to recline the sofa.
Assembly Instructions 1. 2. 3. 4. Please read the following instructions prior to assembling this product: To avoid damage, assemble this product on a non-abrasive surface such as carpet. Make sure all bolts are tightly fastened before use. For home use or light commercial use only. Please make sure you have all parts before assembly.
Parts List(BOX: PP199688) D B QTY 1 pc C QTY 1pc QTY 1 pc Parts List(BOX: PP199687) A E QTY 1 pc G F QTY 1 pcs H QTY 4 pcs J I QTY 4 pcs K QTY 1 pc QTY 1 pcs QTY 1 pc L QTY 1 pc ~8~ QTY 2 pc
Step 1 1 Place the Seat (A) on its back on a flat smooth surface. Take out the bag which holds a rectangle box. 2 Take out the transformer (G 4pcs) &wire plug (H 4pcs) universal wheel with bolts (L 2 pcs) from the bottom of the seat.
Step 2 Place the main seat (A) on it’s back, and fixing the two universal wheel with bolts as below: A L ~ 10 ~
Step 3 Attach handrest (B&C) to seat (A) by aligning the metal grooves on handrest to brackets on the sides of the seat(A) as shown. Ensure the handrest (B&C) slides down fully over the brackets on the right side and left side of the seat (A) respeectively.
Step 4 Ensure the backrest (D) slides down fully over the brackets on the seat (A).
Step 5 Ensure the wings (E&F) slides into the right and left side of the the backrest (D).
Warnings Sit down in the chair gently. To avoid tipping over, do not throw yourself into the chair. Move the chair into the reclining position slowly, making sure that no children or pets are in close proximity. Do not allow children to play on or around the chair, particularly when it is in an open position. Close the recliner completely before getting out of it. Never sit on the footrest when it is open, even if it is a child.
How to Disassemble Please find a strong tool to prod the small piece of metal grooves, then the backrest will be pulled out. The tool is not included.
