User's Manual

4G LTE Router User Manual
06/16/14
30
 Server Address – inputting the server IP that you register.
 Username – inputting the username that you register.
 Password – inputting the password that you register.
After setting up the above informations and clicking the “Register” button to
register the server, you can call up via the device.
4.4.3 System Settings
Figure 4-4-3-1 System Settings
4.4.3.1 Firmware U p g ra de
 Local Upgrade
On this page, you can upgrade the current Router version and LTE Version
from the local PC. 100s is needed to complete the whole upgrade process, and
then the device will reboot automatically.
Figure 4-4-3-1-1 Firmware Upgrade
Note:
1) The firmware version must be suitable for the corresponding hardware;
2) Please make sure the adequate and stable power supply while upgrading.
4.4.3.2 Device Security
The default password is admin, you can enter 1~32 characters for 2 times as
your new password. Then you would logout automatically and you s h o uld lo g i n to
the system by the new password.