User's Manual

4G LTE Router User Manual
06/16/14
28
Figure 4-4-2-11-1 System Security Settings page
 Remote management(via WAN)
You can access to the router via WAN IP address and achieve the remote
control function when the remote management feature is enabled.
 Remote management(via Wi-Fi)
The users on the wireless client are able to manage the WebGUI in default, you
can disable this feature here.
 Respond to PING on WAN
It is allowed to ping on WAN in default, you can disable it here.
 SPI Firmware
Enable this feature to enhance protection to all the wired and wireless PCs
against intruders and most known Internet attacks.
 UPNP
You should enable the UPnP feature firstly before you use this function.
 HTTPS Web Login
This function allows the users to login the system by the https protocol method.
4.4.2.12 NTP
From this page, you can set the Current Time, Time Zone, NTP Server and NTP
synchronization. When the device obtains the WA N I P, the current time will
synchronize with the NTP server automatically.
Figure 4-4-2-12-1 NTP Setting