User's Manual

4G LTE Router User Manual
06/16/14
26
Figure 4-4-2-8-2 Configure the static routing settings
 Destination: The address of the network or host that assigned by the static
route;
 Range: Host/Net;
 Gateway : This is the IP address of the gateway device that is used to contact
between the router and the network or host;
 Interface: LAN/WAN/Custom;
 RIP: Enable the R I P, every 30 seconds, the system will update and learn the
routing information nearby automatically.
Figure 4-4-2-9-3 New rule table
4.4.2.9 Wireless Clients
From the “Wireless Clients” page, you can see the detail information of the
connected wireless devices, such as IP address, MAC address, MCS, RSSI and so on.
You can a lso kick the selected users by clicking the “Kick” button, then the
connection between the wireless clients and the router will be disconnect
immediately.
The users that you kicked will be shown on the kicked wireless stations, you
can restore them if you need.