User's Manual

4G LTE Router User Manual
06/16/14
20
Figure4-4-2-1-4 Rule Table
4.4.2.2 IP/Port Filtering
From this page, you can configure the IP/Port filter to forbid relevant users to
login the router device.
The default IP/Port filter setting is disabled, so you should enable it before you
begin to configure the filter. Then clicking the “Add New” button, you can
configure the settings you like (Figure 4-4-2-2-3).
Default Policy: The packets that don’t match with any rules would be
“Dropped/Accepted”. If you choose “Dropped” here, the action of the new rule
would be “Accept”. Otherwise, the action turns to be “Drop” and the packet that
don’t match with any rules would be accepted.
Figure 4-4-2-2-1 IP/Port filtering page
Figure4-4-2-2-2 Enable IP/Port Filtering function
 Dest IP Address – The IP address of a website that you want to filter (Such as
google 74.125.128.106).
 Source IP Address - The IP address of PC. (Such as 192.168.0.2).
 Protocol- T C P, U D P, I C M P
 Dest Port Range- To restrict Internet access to the single user, you can set a