User's Manual

4G LTE Router User Manual
06/16/14
19
wireless client users are not allowed to surf the Internet.
Figure 4-4-2-1-1 MAC Filtering page
The default MAC filtering setting is disabled, so you should enable it before you
begin to configure the filter. Then click the “Add N e w ” button, you can configure
the rules you like (Figure 4-4-2-1-3).
Default Policy: The packets that don’t match with any rules would be
“Allow/Deny”. If you choose the “A llow ” button here, the MAC address that yo u add
would be dropped. Otherwise, only the MAC addresses on the rule table can be
accepted.
The new rules will be shown on the rule table, here you can delete the rules that
you have selected and add new rules sequentially. The maximum rule count is 10.
(Figure 4-4-2-1-4)
Figure4-4-2-1-2 Enable MAC Filtering function
Figure4-4-2-1-3 Add Rule