User's Manual

4G LTE Router User Manual
06/16/14
14
Figure 4-4-1-3-1 Wi-Fi Settings
 Wi-Fi Sta tus: Enabled(default)/Disabled
The Wi-Fi status is enabled in default, you can only connect to the device by
CAT-5 Ethernet cable if it is disabled.
 Wi-Fi Standard:
The router can be operated in five different wireless modes:”11b/g mixed
mode”, “1 1b o nly ”, “11g only”, “11b only”, ”11b/g/n mixed mode”.
Figure 4-4-1-3-2 Wi-Fi standard
 Network Name(SSID)
To identify your wireless network, a name called the SSID (Service Set Identifier)
is used. You can set it to anything you like and you should make sure that your
SSID is unique if there are other wireless networks operating in your area.
 Frequency (Channel)
This field determines which operating frequency will be used for Wi-Fi. It is not
necessary to change the wireless channel unless you noticed the interference
problems with other access points nearby.