User Manual 09105600
0. Table of Contents 1. Safety Instructions 2 1.1 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.2 Brief Description of the Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 1.3 Basic Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. Overview 3 2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3. 2.2 Programming keypad . . . . . . .
Safety Instructions 1. 1.1 Symbols ! WARNING Can cause damage. i INFORMATION Useful or important information. See attached documentation. 1.2 Brief Description of the Grinder Q9 Series is a completely automatic grinder that pre-grinds or instantly grinds coffee beans. Simply insert the filter holder into the corresponding space to obtain one or two servings of fresh-ground coffee.
Overview 2. 2.1 Overview i i Removable hopper Hopper closed. Hopper open. Coffee identification label Grinding point adjustment knob Display and keypad Coffee press Single serving switch Double serving switch Grinds tray Filter holder area Characteristics: i HEIGHT: 610 mm. WIDTH: 193 mm. DEPTH: 391 mm. WEIGHT: 16 Kg. HOPPER CAPACITY: 1.5 kg POWER: 230 V, 50 Hz. POWER RATING: 525 W General switch - General turn-on or turn-off. Located beneath the grinds tray. DDDGG General switch 2.
Installation 3. Once unpacked, set up the machine in the desired location (an electrical plug is required), making sure it is on a stable surface. Connect the mains cable, place coffee in the hopper, open the hasp and press the general switch located under the grinds tray. The grinder is now ready for use. ! Warning: - The manufacturer is not responsible for breakage or damages due to failure to follow the instructions and rules outlined in this manual. First Use 4.
. Internal Cleaning of the Grinder See attached documentation For this cycle, the two chutes that dispense ground coffee are opened so as to carry out a cleaning of both using the cleaning brush provided. To access this cycle, press the 1 coffee key and the 2 coffees key at the same time for 3 seconds. A message that reads “CLEA” will appear on the screen and will remain there. 1 . Press the one serving and two serving keys at the same time for 3 seconds.
. Programming: User Menu The grinder has a programming keypad which allows the user to program both single and double servings quickly. It is also possible to program the work mode: PREGRIND: after filling a serving, leave the next serving pre-ground. INSTANT: grind the coffee serving right when you need it. Once you have accessed these menus, if 20 seconds go by without pressing any key, you will be automatically returned to the normal work program. 8.
8.3 Programming work mode It is possible to select the mode in which the Q9 grinder dispenses ground coffee: either the Pre-grinding mode or the Instant mode. PREGRIND: coffee is already ground for the next coffee. INSTANT: coffee is ground at the time of requesting it. . PrE InS i . Nota: - Keep pressed 3 sec. We recommend the Pregrind mode to maximize the grinder´s efficiency. 2 sec. without pressing to exit. 8.
Warning Messages 9. 9.1 CLEA If the blinking message “CLEA” appears on the display screen, this means that it is time to carry out a cleaning cycle (follow the instructions in section 8 of the manual, “Internal Cleaning”). This message appears after a certain number of coffee servings have been ground; the factory default value is 300 servings. Each time a cleaning cycle is carried out, whether the machine requests it or not, the serving counter for cleaning will be automatically re-set to zero.
