Use and Care Manual

P
Q
9
10
5
Hanging the TV onto the Wall Mount
HEAVY!
Use an assistant
for this step.
TV
Wall
Wall
TV
VESA Plate Screws
6
Wall
"
"
"
"
Installing the VESA Plate
4c
For VESA: 300x300, 400x400mm
For VESA 300x300mm, 400x400mm,
attach extension arms as shown.
Choose the appropriate screws, washers, and
spacers (if necessary) according the type of
your TV, attach the VESA plate to the back of
the TV and tighten screws using a screwdriver.
(see below)
Flat Back Panel
Curved Back Panel
NOTE
For TVs with curved back, use spacers
as needed. Use washers for M4 or M5
screws only.
F/ H/ J/ L
E
(Use for F/ H only)
G/ I/ K/ M
E
(Use for G/ I only)
D
Top of the TV
Back of the TV
Top of the TV
Back of the TV
Then, while holding the TV securely by an assistant, ensure the VESA plate screws are
tightened by using a screwdriver.
Using an assistant, hang the TV onto the
wall bracket as shown above.
To connect the cables to your TV, run the cables through the cable clip.
Keep the cables
loose for cantilever
arm movement.