Use and Care Manual

7
8
Installing the VESA Plate
4a
For VESA: 200x200mm or smaller
Flat Back Panel
F/ H/ J/ L
VESA Plate
E
(Use for F/ H only)
Top of the TV
Back of the TV
Curved Back Panel
G/ I/ K/ M
D
E
(Use for G/ I only)
Top of the TV
Back of the TV
NOTE
Tighten all screws but
do NOT over tighten.
Choose the appropriate screws, washers, and spacers (if necessary)
according the type of your TV, attach the VESA plate to the back of
the TV and tighten screws using a screwdriver.
SKIP TO STEP 5 SKIP TO STEP 5
CAUTION!
For TVs with mounting hole
patterns VESA 200x200mm
or smaller, move the VESA
plate up or down to select a
different mounting position
to avoid blocking the input
panel on the back of the TV.
Select the proper screw by hand tightening
screws to check thread depth for your TV.
"
"
"
Flat Back Panel
F/ H/ J/ L
E
(Use for F/ H only)
Top of the TV
Back of the TV
Curved Back Panel
G/ I/ K/ M
E
(Use for G/ I only)
D
Top of the TV
Back of the TV
Choose the appropriate screws, washers, and
spacers (if necessary) according the type of
your TV, attach the VESA plate to the back of
the TV and tighten screws using a screwdriver.
(see below)
Installing the VESA Plate
4b
For VESA: 300x200, 400x200mm
NOTE
For TVs with curved back, use spacers
as needed. Use washers for M4 or M5
screws only.
P
Q
For VESA 300x200mm, 400x200mm,
attach extension arms as shown.