Use and Care Manual

3.“ ”“Power” key: soft on-off key. In the standby state, press the start key,

the power indicator lamp LED is normally on, press it again, it enters the standby state.

4.“

” “Time” key: the default preset time of the product is10-20 minutes.

After it is used for 10-20 minutes, the product will shut down automatically for protection.

5.“

” “Heat” key: if users want the product to have the spontaneous heat,

they can press heating switch key for heating.

I. Precautions for safety maintenance

1.Precautions for safety maintenance are to prevent you and other users from being

damaged or hurt and guarantee safety use. Users shall know this point.

2.Xiamen IDENO Electronics Technology Co., Ltd. (“IDENO”) shall not bear any

compensation liabilities for the loss and damage caused to the user or the third party owing to

improper use of product or accessories or any compensation liabilities for the loss and

damage to the parts owing to intentional damage and (or) crash.

3.Prior to use, please read the Instructions carefully for operating correctly. After

reading, the users shall keep it well for reference at any time.

4.Anyone during medical treatment can use the product after obtaining the instruction of

the doctor to avoid the occurrence of accident or bad effect.

5.Children are forbidden to use or sit on the massage armchair for playing, or else it

may cause accident or hurt.

6.If you use the accessories bought from the accessory market rather than that provided

by IDENO to repair, replace the normal rapid wear components and/or manual control circuit

parts, it may cause mismatching of manual control performance, and even failure of normal

operation. IDENO shall not be responsible for it.

7.IDENO does its utmost to guarantee the accuracy of product operation manual.

However, these printed files and texts may include incorrect technology or printing error,

IDENO will not be responsible for the appropriateness of the information and text, or the

error in these files and texts. We reserve the right of revising technical parameters of the

Specification and installation figures.