Operation Instructions PP195794 Manual recliner&massage function ~1~
MASSAGE CHAIR READ ALL INSTRUCTIONS BEFORE USING THE ITEM REMOTE CONTROL Function of remote MODE：D-610 Prior to use, please firstly connect controller, and then connect the power plug. Touch the power switch lightly, the product starts working. When stopping using it, please firstly turn off the controller and then pull out the adapter plug from the outlet. 1.The specification of power adapter: input, AC110-240V, 50-60Hz; output, DC 12V, 2500mA. 2. The product is 3D Kneading massager.
.“ ”“Power” key: soft on-off key. In the standby state, press the start key, the power indicator lamp LED is normally on, press it again, it enters the standby state. 4.“ ” “Time” key: the default preset time of the product is10-20 minutes. After it is used for 10-20 minutes, the product will shut down automatically for protection. ” “Heat” key: if users want the product to have the spontaneous heat, they can press heating switch key for heating. 5.“ I. Precautions for safety maintenance 1.
8.If the massage armchair doesn’t work or is observed to be abnormal, please stop using it immediately and contact the retailer. 9.If the users feel abnormal in use, please stop using it immediately; 10.Please use it in a dry and ventilated place without direct sunshine. For the human body fitness, the massage each time should be as better as for at most 30 minutes. 11.The moron and disable who cannot express their wills cannot use the massage armchair by themselves. 12.
HEALTH CAUTION If you have any concerns regarding to your health, consult your doctor before using this product. Individuals with pacemakers should not use this product. If you have pain in a muscle or joint after using for a prolonged period of time, discontinue using and consult your doctor. Persist pain could be a symptom of a more serious condition. MAINTAINANCE INSTRUCTIONS TO STORE: Place unit in its box or safety dry and cool place.
OPERATING INSTRUCTION Open it Press to open it TECHNICAL SPECIFICATIONS Model:PP195794 Rated Voltage :100V-240V~ Rated Frequency :50Hz/60Hz ~ 6~
Assembly Instructions General Assembly information Guide 1. 2. 3. 4. Please read the following instructions prior to assembling this product: To avoid damage, assemble this product on a non-abrasive surface such as carpet. Make sure all bolts are tightly fastened before use. For home use or light commercial use only. Please make sure you have all parts before assembly.
Parts List A B 1 PCS C 1 PCS D 1 PCS E 1 PCS F 1 PCS 1 PCS ~8~
Step 1 1 Place the Seat (A) on a flat smooth surface. Take out the bag which holds a rectangle box. 2 Take out the transformer F 1pc.
Step 2 Attach backrest (B) to main frame (A) by aligning the metal grooves on backrest to brackets on the main frame as shown. Ensure the backrest (B) slides down fully over the brackets on the main frame (A).
Step 3 Align the female brackets at the back onto the male.brackets at the seat，insert back rest to the seat then push to the end and make sure it is fixed in position securely.
Step 4 Please insert the backpack to the back rest and make sure it is secured in position.
Step 5 Attach the transformer (F) to the plug on the back of seat (A).
Step 6 Please fold the cushion backrest over the back of the recliner for a more intensive massage.
Warnings Sit down in the chair gently. To avoid tipping over, do not throw yourself into the chair. Move the chair into the reclining position slowly, making sure that no children or pets are in close proximity. Do not allow children to play on or around the chair, particularly when it is in an open position. Close the recliner completely before getting out of it. Never sit on the footrest when it is open, even if it is a child.
How to Disassemble Please find a strong tool to prod the small piece of metal grooves, then the backrest will be pulled out. The tool is not included.
