Owner manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
13
Installation:
1. 3/16” Allen wrench attachment tip (provided with S-5 Clamps) is required for installation
of Permanent Adjustable Standing Seam Roof Anchor. To install, attach Allen wrench
attachment to compatible 1/4” drive screw gun.
2. Adjust Permanent Adjustable Standing Seam Roof Anchor to match roof seam spacing.
Compatible with roof seams from 12” - 24” apart. Tighten all (4) bolts on Tie-Off Bar to 25-30
foot-pounds.
3. Place all S-5 Clamps over selected roof seams. S-5 Clamps and Seam Bars MUST be
perpendicular to roof edge. Both sets of S-5 Clamps must be the same distance from roof
edge.
12” - 24”
Roof Edge
25-30
ft.-lbs.