Owner manual

Components and Specifications
Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
11
Large
Tie-Off Bar
Seam Bar
x1 per side (L/R)
Tie-Off
Tab
L R
S-5 Clamp
x4 per side (L/R)
Some assembly of components is necessary prior to installation and use of Permanent
Adjustable Standing Seam Roof Anchor. Always use fasteners provided by Guardian Fall
Protection. Components are manufactured from the following materials:
Large Tie-Off Bar: Aluminum Seam Bar (2): Aluminum
Tie-Off Tab: Stainless Steel S-5 Clamp (8): Aluminum
• (2) Set Screws are provided with each S-5 clamp. S-5 Clamps are designed with four Set
Screw holes for increased versatility, but require only two Set Screws for proper
installation of the Permanent Adjustable Standing Seam Roof Anchor.