User guide

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
13
Labels
User must inspect prior to EACH use. Competent Person must complete
formal inspection every 6 months. Competent Person to inspect and initial.
Product lifetime is indefinite as long as equipment
passes pre-use and Competent Person inspections.
If equipment fails inspection, IMMEDIATELY REMOVE FROM SERVICE.
Date of First Use:
________________
For reference only. To be blank window.
Select applicable product part #.
Capacity range: 130-310 lbs., or up to 420 lbs. if used
with equipment explicitly certified for such use.
All PFAS equipment must be selected and deemed
compatible with CB Anchor by a Competent Person.
Only make compatible connections.
MAXIMUM 1 connection per anchor.
Avoid contact with hazards, including, but
not limited to, heat, chemicals, electricity,
and sharp or abrasive edges and surfaces.
!
WARNING
Refer to instructions for proper installation and
connection methods.
Inspection
J F M A M JJ A S O N D
20___
20___
20___
20___
20___
www.guardianfall.com
1-800-466-6385
6305 S. 231st St.
Kent, WA 98032
CB-1-B
Part #: 00600
Materials: galvanized steel
or powder-coated steel
Prior to use, read and understand
all manufacturer’s instructions provided
with equipment at time of shipment.
Compliant with OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
Date of Manufacture:
90088
(Rev. A)
DO NOT remove labels.
3/4”
3”
6305 S. 231st St.
Kent, WA 98032
1-800-466-6385
www.guardianfall.com
CB Anchor Series
Part #:
Date of Manufacture:
Materials: Galvanized steel or powder-coated steel
Prior to use, read and understand all manufacturer’s
instructions provided with equipment at time of shipment.
Compliant with OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
Capacity range: 130-310 lbs., or up to 420 lbs. if used
with equipment explicitly certified for such use.
All PFAS equipment must be selected and deemed
compatible with CB Anchor by a Competent Person.
Only make compatible connections.
MAXIMUM 1
connection per anchor.
Avoid contact with hazards, including, but not limited to, heat,
chemicals, electricity, and sharp or abrasive edges and surfaces.
!
WARNING
Refer to instructions for proper installation and connection methods.
6”
3--1/2”
User must inspect prior to EACH use. Competent Person
must complete formal inspection every 6 months.
Competent Person to inspect and initial.
Product lifetime is indefinite as long as equipment
passes pre-use and Competent Person inspections.
If equipment fails inspection, IMMEDIATELY REMOVE FROM SERVICE
DO NOT REMOVE LABEL
Date of First Use:
________________
Inspection Grid
J F M A M JJ A S O N D
20___
20___
20___
20___
20___
90087 (Rev. B)Made in China