smartwatch User Manual © 2013 Qualcomm Connected Experiences, Inc. All rights reserved.
Table of Contents Getting Started............................................................................................................................... 3 Setting Up Your Qualcomm Toq Smartwatch..............................................................................................................................3 Using Your Smartwatch.................................................................................................................................................................
Getting Started Thank you for purchasing a Qualcomm® Toq™ smartwatch. This user manual describes how to get started using your new smartwatch and Qualcomm® WiPower™ LE wireless charger. You can also check out helpful setup videos at Toq.Qualcomm.com/video. NOTE: Before you begin, remove all protective plastic from the smartwatch power adapter, and wireless charger. Setting Up Your Qualcomm Toq Smartwatch 1) Charge Your Smartwatch Charging turns on your smartwatch.
2) Download the Qualcomm Toq App 1. On your Android phone, go to the Google Play™ Store and search for “Qualcomm Toq.” 2. Download and install the Qualcomm Toq App. 3) Pair the Smartwatch with Your Phone The Qualcomm Toq smartwatch connects to your phone like any other Bluetooth® device. Please ensure that your smartphone has Bluetooth enabled before you begin. 1. Place the smartwatch on the wireless charger for a few seconds, and then remove it to activate the Welcome screen. 2.
Using Your Smartwatch Before using your smartwatch, be sure you have completed the steps in “Setting Up Your Qualcomm Toq Smartwatch,” above. The following sections will help familiarize you with navigating and using the features on your smartwatch: 1) Tap the Home/Lock touch sensor. • Your Toq Smartwatch is equipped with a touch sensor in each wrist band. On the strap below the screen, lightly tap the Home/Lock touch sensor to do one of the following: oo Activate the touch screen and browse applets.
4) Double-tap the Light touch sensor. • On the strap above the display, lightly double-tap the Light touch sensor to toggle the front light on or off. “Light Duration” (the amount of time the front light will remain on during inactivity) and “Light Double-Tap Speed” (the preferred double-tap speed required to turn on/off the front light) can be configured in the Toq App on your phone under the Advanced Settings menu. Light touch sensor 5) Personalize your favorite Toq Applets.
Customizing the Smartwatch Strap You can customize the strap on your Qualcomm Toq smartwatch so that it fits perfectly on your wrist. A helpful fitting guide video is also available online at Toq.Qualcomm.com/video. NOTE: You must not cut the strap that’s attached to the clasp. Trim only the opposite strap with visible grooves as outlined in the instructions below. When fitting the strap, be sure to only place the smartwatch face on soft surfaces.
2. Wrap the clasp end of the strap around the underside of your wrist and hold it in place. Wrap the long end of the strap on top of the clasp end, and hold it in place so that the strap is comfortable around your wrist. 3. Make note of the strap hole that is in alignment with the holes at either end of the strap receptacle slot in the clasp. Obtain a spring bar pin from the bag attached to the card included in the box. Insert the spring bar pin into the strap to mark the correct hole. 4.
6. Attach the cut side of the strap to the clasp: oo Bend the cut side around and align with the strap receptacle slot in the clasp. oo Insert one end of the spring bar pin first into a pin hole in the clasp. Then rotate the other end of the pin to align with the other hole, depress the pin head, and slide it into place until it clicks. Click oo Gently tug on the connection between the cut end of the strap and the clasp to make sure the spring bar pin is secure. 7.
Additional Fitting If the strap remains too loose around your wrist, you can repeat the fitting procedure described in Sizing the Strap. 1. Use a paper clip to release the strap from the clasp, and depress the spring bar pinhead until it clears the inside surface of the hole on the side of the clasp strap slot. 2. Rotate the strap out of the clasp and then lift the other side of the spring bar pin out of the hole at the other end of the clasp strap slot. 3.
Clock Faces Clock face Mode The Home/Lock touch sensor (located on the bottom wrist band) toggles between the clock faces and the applet launcher. In clock face mode, you can slide between your favorite clock faces using the touch sensitive Clock Face slider at the bottom of the display below the design element. Favorite Clock Faces Light touch sensor Touch screen Clock Face slider Home/Lock touch sensor Your smartwatch has a wide range of clock faces from which to choose.
Toq Applets Your Qualcomm Toq smartwatch comes with a number of preloaded applets. This section provides an overview of applets and how to access them. Applet Mode The applet launcher allows you to browse applets on the smartwatch. If you are in clock face mode, tap the Home/Lock touch sensor to go to the applet launcher. If you have an applet open already, simply tapping the Home/Lock touch sensor will bring you back to the applet launcher.
Favorite Icon Styles The Applet Launcher can be personalized with your favorite icon styles via the Preferences section of the Toq App on your phone. Your smartwatch has a selection of colorful icon styles to choose from. Choose your favorite icon style by tapping the style you want to display on your smartwatch. • Tap to select an icon style. Tap again to deselect that icon style. • When you are happy with your selection, tap Done.
Comm Hub Applet The Comm Hub applet allows you to initiate and accept voice calls, send quick replies, view recent call and text activity, and more. If you have favorite contacts configured on your Android phone, your smartwatch will have a distinct vibrate pattern for incoming calls and notifications from your favorite contacts. • To open the Comm Hub applet from clock face mode, tap the Home/Lock touch sensor to open the applet launcher and tap Comm Hub.
• Favorites: Lists your favorite contacts from your Android phone’s Contacts app. Your smartwatch will have a distinctive vibrate pattern for all calls and notifications from your favorite contacts. oo Tap a favorite contact to see their contact information. oo Tap on a number to call or send a quick reply to that number. oo If you don’t have any favorite contacts configured, you can easily do so by marking certain contacts as favorites on your phone. Refer to your phone’s user guide for instructions.
Making a Voice Call To initiate a voice call, select a contact, tap on the message (or number) and then tap on the Call icon as shown. You can also initiate a voice call from an incoming Text Notification by tapping on the notification and then tapping the Call icon. You can end an active call by tapping on the End Call icon. Incoming and Missed Calls When you receive an incoming call on your smartphone, you can choose to accept or reject the call from your smartwatch.
If you take no action on the incoming call, the call dialog is replaced by the Missed Call notification as shown. Text Message Notifications Your smartwatch can display a text message notification each time a text message is received on your phone. You can tap on the notification or scroll up to read the contents of the message. Tapping again on the notification allows you to call or send a quick reply back to the sender.
Sending Quick Replies To send a quick reply, select a contact, tap on the message (or number) and then tap on the Quick Reply icon as shown. Select a quick reply from the list of predefined quick reply messages and tap SEND. You can also send a quick reply from an incoming Text Notification by tapping on the notification and selecting the Quick Reply icon. You can create and manage your own personalized list of quick reply messages in the Preferences section of the Toq App on your phone.
Advanced Settings The Comm Hub applet has several advanced settings that can be configured using the Advanced Settings menu in the Toq App on your phone. • Watch Vibration: Turns on/off vibration for all notifications and incoming calls. • Privacy Mode: Ensures new notifications, incoming calls, and text messages are kept hidden under the clock face on the smartwatch.
Calendar Applet The Calendar applet shows calendar events for the current day and next day and automatically syncs with any active calendar accounts available on your Android phone. To open the Calendar applet from clock face mode, tap the Home/Lock touch sensor to open the applet launcher and tap Calendar. The applet will automatically display the current or closest calendar event.
Calendar Event Notifications Calendar Event Notifications provide information such as meeting title, start and end times, location and organizer details from a quick glance at your wrist. Notifications for calendar events that occur at the same time will be stacked on top of one another. You can dismiss individual notifications by swiping from left to right on the Notification card. You can dismiss all new notifications by tapping once on the Home/Lock touch sensor.
Music Player Applet The Music player applet enables you to control the media player application on your phone, from your smartwatch. • To open the Music Player applet from clock face mode, tap the Home/Lock touch sensor to open the applet launcher and tap Music Player. • In addition to play/pause, skip forward and back, you can also control the music volume from the smartwatch by tapping on the Speaker Icon.
Weather Applet The Weather applet displays the current temperature as well as daily highs and lows for your favorite cities. You can add more cities in the Toq App on your phone. • To open the Weather applet from clock face mode, tap the Home/Lock touch sensor to open the applet launcher and tap Weather. • Scroll up and down to see the full list of weather cards. • The Last updated field in the weather applet is a useful indicator of how recent the weather information shown is.
Stock Applet The Stock applet displays ticker price information for your favorite US Exchange stocks and indices as well as the recent change in price. Additional Stock and index information can be added in the Preferences section of the Toq App on your phone. • To open the Stock applet on the smartwatch from clock face mode, tap the Home/Lock touch sensor to open the applet launcher and tap Stocks. • Scroll up and down to see the full list of stock cards.
Status Applet The Status applet shows the current connection status between your smartwatch and your phone as well as the level of charge in your smartwatch’s battery. • To open the Status applet from clock face mode, tap the Home/Lock touch sensor to open the applet launcher and tap Status. Possible connection statuses are: oo Phone connected: indicates that your phone is in range and connected. oo Unpaired: indicates that you must pair your smartwatch with your phone.
Away from Phone Notifications If your smartwatch becomes out of range with your phone you will see the Away from Phone notification. This notification normally indicates a temporary disconnected state and can often be a helpful reminder that you’ve forgotten your phone. The notification will disappear once the phone and smartwatch are back within range of each other and can also be swiped away at any time.
oo Power off: Tap to Power off your smartwatch. NOTE: You will need your wireless charger to turn your smartwatch back on! Turn your smartwatch on again by placing it on the wireless charger for a few seconds. Notifications Applet The Notifications applet stores your favorite Android application notifications so you can view them on your smartwatch. Application notifications are configured in the Preferences section of the Toq App on your phone.
You can select the Android applications you wish to receive notifications from in the Toq App on your phone. This feature requires additional user permissions the first time you set up the feature in the Toq App. Follow the instructions on your phone. • Once you have enabled this feature, the Toq App displays a list of the application’s installed on your phone. • Select the applications from which you wish to receive notifications to your smartwatch and tap Done.
Software Updates The Qualcomm Toq smartwatch software updates over the air. When you download and install the latest Toq App on your Android phone, the app will check for available software updates to ensure you have the latest software running on your smartwatch. If you have automatic updates enabled in the Google Play Store’s setting menu, the Toq App will update automatically when a software update becomes available.
Watch Status Card The Watch Status card shows the current status of the connection between your smartwatch and your phone as well as the status of any software updates that are currently in progress. During a software update the smartwatch may become disconnected from the phone application. This is part of the software update process and is expected behavior. When the software update has completed successfully, the smartwatch will become connected again.
Qualcomm® WiPower™ LE Wireless Charger Your wireless charger uses Qualcomm® WiPower™ LE charging technology for hassle-free charging.
When to Charge Your Smartwatch Your smartwatch can last multiple days on a full charge. Low battery alerts occur when the battery level on your smartwatch reaches less than 33% and again at 5% to remind you to place the smartwatch on the charger. • Less than 33% - Low battery Warning • 5% - Critically Low battery warning – you should place your smartwatch on the wireless charger as soon as possible.
Useful Charging Tips: • If your smartwatch battery level falls below 5%, it enters a low power mode to conserve power. In low power mode, the Bluetooth radio in the smartwatch is turned off and the smartwatch will temporarily become disconnected from your phone. Place the smartwatch on the charger until the desired level of charge is reached. • If your smartwatch battery becomes completely drained, the display may turn off.
Troubleshooting Difficulty pairing or connecting your smartwatch to your phone Verify the version of Android on the smartphone. It must be 4.0.3 or higher. • On your smartphone’s Bluetooth settings screen, make sure Bluetooth is turned on and then scan for available devices. • If “Toq Smartwatch” is not visible on the smartphone’s Bluetooth menu, turn off Bluetooth on your phone, and then turn it back on.
Data is not getting updated on smartwatch Stock and weather data is updated each time you add data in the Toq App on your phone. The Toq App then periodically updates this data on the smartwatch using your phones data connection • Make sure the smartwatch is connected (must be within approximately 30 feet) to the smartphone and that the smartphone has an active data connection. • On your smartwatch, navigate to Settings > Bluetooth and confirm the correct smartphone is connected.
Difficulty charging your smartwatch If the smartwatch is not charging correctly: • Make sure the charging indicator light on the wireless charger is illuminated. • If it is not, make sure the charger is connected to the mains power using the supplied power adapter and USB cable. If there is power but the light is not illuminated and the smartwatch is not charging, contact Customer Care. • If the indicator light is a flashing red do the following: oo Remove the smartwatch from the charger.
Smartwatch screen is too dark The Qualcomm Toq display uses Qualcomm® Mirasol™ technology, which is a reflective technology that appears optimally in well-lit conditions, especially outside. • Make sure the smartwatch is fully charged. • When using the smartwatch in a darker environment where the display is harder to see, turn on the frontlight by double-tapping the Light touch sensor (located on the watch band above the screen).
Copyright and Trademark Information © 2013 Qualcomm Connected Experiences, Inc. All rights reserved. Qualcomm and WiPower are trademarks of Qualcomm Incorporated, registered in the United States and in other countries. Qualcomm Toq is a trademark of Qualcomm Incorporated. All Qualcomm Incorporated trademarks are used with permission. Mirasol is a trademark of Qualcomm MEMS Technologies, Inc., used with permission. AllJoyn is a trademark of Qualcomm Innovation Center, Inc.
