Product specifications

Hardware Description
5-16 80-99240-1 Rev. D
• Do not fasten the modem with enough clamping force to
damage the printed circuit board.
• Exercise caution and do not damage components on the
modem during handling.
Note
The GSP-1620 modem meets or exceeds all operational vibration
requirements defined in Table 6-1 on page 6-4 when E-A-R damping
feet (MF-100-UC04-H, black) are used as shock mounts.
Modem Antenna Specifications
The GSP-1620 modem is to be used with an aluminum
Dielectric Resonator Antenna (DRA), as shown in Figure 5-3
and Figure 5-4. The modem DRA has a passive transmit and
an active receive section. The transmit (Tx) and receive (Rx)
connectors are labeled on the antenna.
Figure 5-3 DRA Side View