User guide
35
TG84-73001-1C X1
Preferences: Calling
• Calling features include:
➭
Automatically answer the call after specified number of rings
➭
Automatically redial a busy number
➭
Call any location number in the phone book without having to
press Send
➭
Press any key to answer the phone when in standby mode (not
just the Send
key)
➭
Maximize battery life with deep sleep options
➭
Send PIN when analog cellular phone calls support this feature
Auto Answer: Settings include automatically answering the call after one ring or two rings
(or off). This option is set separately for regular use and for use in the car kit.
Auto Redial: This feature allows the user to automatically redial a busy number. With the
phone in standby mode, the phone will automatically redial at the selected interval: every
10 seconds, every 30 seconds, or every 60 seconds. This continues until the call connects or
the user presses (End).
One Touch Dial: With this feature enabled the user can dial any of the 99 phone book
location numbers without pressing the (Send) key. Press and hold the last key of the
location number to use this feature, e.g., to dial location 32 press ( 3 ) then press and hold ( 2
)
.
Any Key Answer: This feature allows the user to press any key except (Pwr) or (End) to
answer a call. With this feature disabled the user has to press (Send) to answer a call.
Deep Sleep: This feature works in the power save mode to maximize battery life.The
phone goes into power save mode after several unsuccessful attempts to acquire service.
Deep sleep settings specify the amount of time the phone will remain inactive before
searching again for service.The settings are 15 minutes (maximum power savings), 10
minutes, 5 minutes, or off (minimum power savings).
Send PIN: Some analog cellular service providers allow the entry of a PIN for verification
before using the service. A user who frequently uses analog cellular service will want to set
this feature to prompt. This will prompt the user to send the PIN after entering a phone
number. The PIN that was entered in the Enter PIN option of the Security menu is sent.